October 11, 2016 | Volume 12 Issue 38 |
Manufacturing Center
Product Spotlight
Modern Applications News
Metalworking Ideas For
Today's Job Shops
Tooling and Production
Strategies for large
metalworking plants
Designed to quickly and carefully remove hot plastic parts from an injection-molding machine, FIPA's latest custom gripper system automates a manual demolding process.
FIPA, a leading manufacturer of advanced vacuum technology, gripper systems, air nippers, tube lifters, and end-of-arm-tooling (EOAT), recently developed a custom gripper system for an injection-molding machine dedicated to making automotive lighting reflectors.
Designed for ZEIBINA Kunststoff-Technik GmbH, a renowned German plastics processing company, FIPA's latest custom gripper system automates what had been a manual demolding process. The aim was to protect employees from handling hot (120 deg C) plastic parts and improve quality by ensuring that parts are removed from their molds free of any marks or paint-wetting impairment substances (PWIS) that could potentially interfere with subsequent coating processes. The new gripper system also successfully reduces cycle times to just over 30 seconds, considerably increasing factory throughput.
Developed at FIPA's main manufacturing facility in Germany, this custom gripper system is exclusively comprised of components from FIPA's modular construction kit, including: sprue grippers that combine a high closing force for secure gripping with a soft, heat-resistant HBNR elastomer coating for blemish-free handling, finger grippers that prevent parts from laterally slipping, and sensor-enabled grippers that monitor and inform the success of the overall handling sequence.
"After the lighting reflector blanks are removed from the injection-molding machine, they're transported to another system that coats the plastic parts with vaporized aluminum and other metals to ensure high surface stability, but for this process to be a success, the parts must be absolutely pristine, which proved too challenging for off-the-shelf solutions," says Dirk Zeibig, managing director at ZEIBINA.
"FIPA has helped us master several other complicated handling challenges over the last few years," says Zeibig, "so there was no question that we would once again entrust them with the design, development, and installation of our latest custom gripper solution. The combination of their robust, reliable components, technical expertise, approachable pricing, and attentive customer service allows us to further enhance both our quality and competitiveness."
"Due to the shape of ZEIBINA's injection-molded parts and the force required to remove them from the mold, it was clear that a standard vacuum-cup solution would not suffice. So, after a close and open exchange with the ZEIBINA team, our engineers used several components from our modular gripper kit to customize an automated handling system to their lighting reflector manufacturing process," says Rainer Mehrer, president of FIPA. "The application-specific gripper system not only satisfied their two primary goals -- protecting employees from handling hot plastic parts and ensuring that they're removed from the mold without any marks or residues -- but also reduced cycle times down to 33 seconds, allowing them to significantly increase production."
FIPA components used to assemble the custom gripper system for ZEIBINA's injection-molded reflector process include:
Source: FIPA
Published October 2016